Life Fitness Home Gym Adjustable Decline Bench User Manual

Signature Adjustable Decline Bench  
Owners Manual  
 
FOUND ON THE FRAME  
FOUND AT MOVING PARTS  
 
Signature Adjustable Decline Bench  
Safety & Warranty  
WARRANTY  
WHAT IS COVERED  
This Life Fitness commercial exercise equipment (Signature Benches and Racks) is warranted to be free of all defects in material and workmanship to the  
original purchaser for the specific items and duration listed:  
O
10 years on structural frame  
O
1 year on bearings  
O
1 year on grips  
O
1 year on cables and belts (if so equipped)  
O
1 year for rust or corrosion of structural frame. Scratches or scrapes where the subsurface of the unit has been exposed must have been properly  
repaired by the customer.  
O
90 days on upholstery and any items not specified.  
Life Fitness will ship to you at our expense, any repair parts covered by the warranty as stated. If the Product is deemed not repairable by Life Fitness  
authorized personnel, we reserve the right to replace any or all of the Product at our option within the stated warranty period.  
WHAT IS NOT COVERED  
Any failures or damage caused by unauthorized service, misuse, accident, negligence, improper assembly or installation, debris resulting from any  
construction activities in the Products location, alterations or modifications without written authorization by Life Fitness, or by failure on your part to use,  
operate, and maintain the Product as set out in your Operation Manual (.Manual.). All terms of this warranty are void if this product is moved beyond the  
continental borders of North America (excluding Hawaii) and are then subject to the terms provided by that country's authorized Life Fitness  
Representative.  
TRANSPORTATION & INSURANCE FOR SERVICE  
If the Product or any covered part must be returned to a service facility for repairs, We, Life Fitness, will pay all transportation and insurance charges for  
the first year. You are responsible for transportation and insurance charges for year 2 and beyond.  
 
HOW TO GET PARTS & SERVICE  
Simply call Customer Support Services at (800) 351-3737 or (847) 451-0036, Monday through Friday from 8:00 a.m. to 6:00 p.m. Central Standard Time,  
and tell them your name, address and the serial number of your Product. They will tell you how to get a replacement part, or, if necessary, arrange for  
service where your Product is located or advise you on how and where to ship the Product for service. Before shipping:  
1. Obtain a Return Authorization Number (RA#) from Customer Support Services  
2. Securely pack your Product (use the original shipping carton, if possible)  
3. Write the RA# on the outside of the carton  
4. Insure the Product, and  
5. Include a letter explaining the defect or problem and a copy of your proof of purchase if you believe the service is covered by warranty  
Life Fitness World Headquarters  
Attn: CSS Help Desk  
5100 N. River Rd.  
Schiller Park, IL. 60176  
EXCLUSIVE WARRANTY  
THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO  
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ALL OTHER OBLIGATIONS OR LIABILITIES ON  
OUR PART. We neither assume nor authorize any person to assure for us any other obligation or liability concerning the sale of this Product. Under no cir-  
cumstances shall we be liable under this warranty, or otherwise, of any damage to any person or property, including any lost profits or lost savings, for  
any special, indirect, secondary, incidental or consequential damages of any nature arising out of the use of or inability to use this Product. Some states  
do not allow the exclusion or limitation of implied warranties or of liability for incidental or consequential damages, so the above limitations or exclusions  
may not apply to you.  
CHANGES IN WARRANTY NOT AUTHORIZED  
No one is authorized to change, modify or extend the terms of this limited warranty.  
EFFECT OF STATE LAWS  
This warranty gives you specific legal rights and you may have other rights, which vary, from state to state.  
OUR PLEDGE TO YOU  
Our Products are designed and manufactured to the highest standards.  
We want you completely satisfied with our Products and will do everything possible under the terms of this warranty to keep you secure in knowing you  
have bought the best!  
 
Signature Adjustable Decline Bench  
Assembly Instructions  
Item  
Qty  
Description  
Part Number  
1
2
4
4
Roller Pad  
74247XX  
7322301  
3256202  
7308701  
78219XX  
78218XX  
82374XX  
3256204  
3102514  
82390XX  
82377XX  
3242002  
82463XX  
8239501  
8140101  
3256205  
8140201  
3237403  
8137801  
Fender Washer  
M10 X 25mm Bolt  
Roller Pad Cap  
Head Pad  
3
10  
4
4
5
1
6
1
Back Pad  
7
1
Back Frame  
8
5
M10 X 35mm Bolt  
3/8” SAE Washer  
Base Support Frame  
Base Frame  
9
13  
1
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
1
2
M10 Nylock Nut  
Seat Adj. Assembly  
Pivot Shaft  
1
2
1
Adj. Pivot Shaft  
M10 X 40mm Bolt  
Adj. Pivot Spacer  
1” Hole Plug  
2
2
7
1
Warning Sheet  
Tools Required:  
O
17mm Wrench  
O
Metric Allen Wrench Set  
Ratchet with 17mm Socket  
Ratchet Extension  
O
O
 
1. Slide one ROLLER PAD (1) onto one PAD SHAFT (A) until it contacts the  
pre-installed SHAFT COLLAR (B). Secure the ROLLER PAD using one  
FENDER WASHER (2) and one M10 X 25mm BOLT (3) as shown. Tighten  
the BOLT securely. Insert one ROLLER PAD CAP (4) onto the ROLLER PAD  
as shown.  
Repeat this procedure to install the remaining ROLLER PADS onto the  
remaining PAD SHAFTS.  
2. Attach the HEAD PAD (5) and BACK PAD (6) to the BACK FRAME (7) using  
five M10 X 35mm BOLTS (8) and five 3/8" SAE WASHERS (9). Tighten all  
BOLTS securely.  
3. Assemble the BASE SUPPORT FRAME (10) to the BASE FRAME (11) using  
two M10 X 25mm BOLTS (3), four 3/8" SAE WASHERS (9) and two M10  
NYLOCK NUTS (12) as shown. Tighten all BOLTS and NUTS securely.  
4. Assemble the SEAT ADJUSTMENT ASSEMBLY (13) to the BASE FRAME  
(11) using one PIVOT SHAFT (14). Secure the PIVOT SHAFT using two M10  
X 25mm BOLTS (3) and two 3/8" SAE WASHERS (9) as shown. Tighten the  
BOLTS securely.  
 
Signature Adjustable Decline Bench  
5. Assemble the SEAT ADJUSTMENT ASSEMBLY (13) to the BACK FRAME  
(7) using the ADJUSTMENT PIVOT SHAFT (15). Secure the ADJUSTMENT  
PIVOT SHAFT using two M10 X 40mm BOLTS (16) and two ADJUSTMENT  
PIVOT SPACERS (17) as shown. Tighten the BOLTS securely.  
6. Attach the BACK FRAME (7) to the BASE FRAME (11) using the one PIVOT  
SHAFT (14). Secure the PIVOT SHAFT using two M10 X 25mm BOLTS (3)  
and two 3/8" SAE WASHERS (9) as shown. Tighten the BOLTS securely.  
7. Install 1" HOLE PLUGS (18) into all open bolt holes.  
©
2007 Life Fitness, a division of Brunswick Corporation. All rights reserved.  
Life Fitness is a registered trademark of Brunswick Corporation.  
SADB 1/12/07  
8183801 RevA-1  
 

Lasko Fan 755320 User Manual
Lenovo Computer Drive 43N3222 User Manual
Lenovo Computer Monitor 0A60994 User Manual
Lenoxx Electronics CD Player CD 52 User Manual
Liebherr Refrigerator HC 2062 User Manual
Life Fitness Exercise Bike C1 User Manual
Lincoln Electric Welder 225 GXT User Manual
Makita Air Compressor MAC2400 User Manual
Makita Blower BUB182 User Manual
Makita Impact Driver 6940DW User Manual