LST Smoke Alarm PA58 3 User Manual

Remote Indicator

PA58-3

• Remote indication of the activation of

a conventional or ADM detector

• Connection of up to 3 remote

indicators to one detector

• Display for individual detectors or for

a group of detectors

• Bright, power-saving LED

• Supply through the detector line or

ADM loop

Description

The Remote Indicator PA58-3 serves for the remote – which are combined for a common display.

display of the alarm activation of a ﬁre detector. With Furthermore, due to the low current consumption of

that, the activated detector can be located quickly if the Remote Indicator PA58-3, up to 3 indicators can be

the status LED on the detector is not visible or if the connected to one detector. These multiple indicators

indicator is placed at a remote site.

make it easier for the public safety personnel to locate

That is necessary if, for example, the detector is in- the detector, if, for example, the way to the activated

stalled in a false ceiling or false ﬂoor, or if the activation detector leads through several rooms.

of a detector in a hotel room has to be indicated in the

corridor.

The remote indicator is designed for surface mounting

on a wall or on a ﬂush-mount installation box with a dia-

Depending on the connection, the remote indicator can meter of 55 or 60mm. The cable can be entered either

display the activation of a single detector or of seve- from behind (via the ﬂush-mount cable entry in the wall

ral detectors – e.g., the detectors in a detector zone piece) or via the cable entry for surface mounting.

Speciﬁcations

Operating voltage

Ambient temperature

Dimensions W × H × D

Colour

Supply through the detector line voltage or loop voltage

-30°C to +70°C (no condensation)

80 × 80 × 27 (mm)

white

Weight

42g

Order number

Order name

251003

Remote Indicator PA58-3

Building Safety. Building Security.

PA58-3_DBL_LST_EN_0804.PDF • PAGE 1